Linux

Install RAID0 on Ubuntu Lucid Lynx

rweait's picture

set up RAID0

Create a full-disk partition on each of two drives to be RAID0 combined. Set each full-disk partition as type fd - Linux RAID Auto-detect. Use fdisk or your favourite partitioning tool.

Then:
mdadm --create /dev/md0 --level=0 --raid-devices=2 /dev/sda1 /dev/sdb1
sudo /usr/share/mdadm/mkconf force-generate /etc/mdadm/mdadm.conf
sudo mkfs.ext3 /dev/md0
mkdir /raid
sudo mount /dev/md0 /raid

Everything okay to this point? Add the raid to fstab to mount raid automatically after reboot.

Build your own OpenStreetMap Server

rweait's picture

Where's that awesome tutorial?!?!?

The articles on how to install and test your own OpenStreetMap tile server are some of the most popular articles on weait.com. I have retrieved these articles from the archives. While dated in places, you might find them helpful. Comments are welcome but the articles are essentially unmaintained at this time.

The two versions of the tutorial can be found here.

Subscribe to RSS - Linux